3T-AM has spent the years since late 2021 turning a prototype-heavy metal additive manufacturing operation into one built around repeat production. Eddie Andrews, commercial director at the Newbury-based company, says repeat orders now account for around 70% of revenue. New product introduction still takes up roughly 80% of the team’s time.
That split is the central tension in 3T-AM’s move from one-off components to serial supply. Andrews joined in November 2021, when the manufacturer could make a single metal part for hundreds of customers but had to work out how to win the same order again, hit an agreed price and deliver on schedule. His description of the challenge was blunt: “How do you make that boring? How do you make that general manufacturing?”
A fuller order book changes the investment case
Five years later, the answer is visible in how 3T-AM buys EOS metal printers. Andrews says the company might once have bought an M400 to test a material and see what business it could develop. Today, customer programmes account for the capacity of incoming machines before they reach the factory. The investment, he says, is “quite boring” — a reference to planning against contracted demand rather than speculative capability.
The demand mix is led by semiconductor customers, followed by energy, then space and defence. Aerospace remains central to 3T-AM’s plans, but the company has found work for its machines while it waits for more aerospace programmes to reach suppliers at volume. That ordering matters because it shows where production revenue is coming from now, rather than where the company expects it to come from later.
Product ownership and machining move in-house
3T-AM dates its business to 1997 and its first metal machine to around 2008. By the 2021 reset, years of accommodating individual prototype jobs had left “process after process after process” on the shop floor. The company narrowed its customer base, gave larger accounts more influence over development and simplified accumulated procedures. Much of the work remained manual while the team established which operations it could reliably repeat.
Changing who owned a job was as important as changing equipment. Previously, the first person to see a drawing was the engineer responsible for printing it, so the immediate question was how to print the part. Decisions at that stage shaped the work passed to everyone else. Today a product owner is responsible for delivering the finished component, and print and machining specialists agree on the condition of the part as it moves between operations.
3T-AM also brought machining in-house. Andrews’ formulation is that a successful additive manufacturer needs to be a really good CNC machining company. In-house machining gave the SME more control over cost, quality and delivery dates, while larger multi-laser machines improved productivity at the printing stage. Neither investment on its own could tell a customer when a finished part would arrive; the production system had to connect both.
Orders, capacity and the prototype balance
SBO, the Austrian precision manufacturing group, acquired 3T-AM in October 2025. The Newbury business had generated around £5 million in sales in 2024. SBO brought experience in machining downhole drilling equipment, including components up to ten metres long, and was interested in 3T-AM’s metal printing expertise and access to a different set of industrial customers.
SBO approved 3T-AM’s five-year business plan and asked whether it could be done quicker. In August 2026, the group reported that 3T-AM had added an EOS M400 in the second quarter, ordered another printer and invested further in post-processing. Those purchases formed part of a seven-printer expansion across the UK and US operations.
A full order book makes the next machine easier to justify, but it also leaves little time on that machine to qualify a different material or develop a new product. Andrews wants to preserve two distinct reasons to invest: contracted demand, and the work 3T-AM cannot yet offer. The balance is not automatic. He recalls a pre-pandemic aerospace enquiry in which a single family of parts would have required 16 multi-laser systems to cover only a share of the requirement. From the buyer’s side, the question was how many suppliers had the floor space, capital and capacity to take it on. Andrews sees that as one reason original equipment manufacturers still keep sizeable additive programmes in-house.
The commercial transition was also hard to time. Production orders rose and then tapered off. Turning away too much prototype work during the upswing would have left gaps when it eased. Repeat orders now give 3T-AM room to choose which development jobs to take, though some will never become production contracts. Andrews’ point is that without taking part in the journey, a manufacturer never finds out.
What the customer can measure
For some customers, replacing a casting with a printed part earns its keep through lead time alone. A legacy or development programme can obtain a component sooner, even at much the same unit cost. At higher volumes, the calculation gets tougher. Machine maintenance contracts and consumables weigh on the hourly rate, and a factory working a single shift has fewer productive hours over which to spread those costs. Andrews sees scope to learn from CNC shops that operate around the clock, and identifies support removal as one place to look for automation, because the process can still depend on what an experienced operator knows about a particular job.
A project with Honeywell Aerospace will test another claim for additive manufacturing. Under an Aerospace Technology Institute-funded programme, the partners are converting an existing conventionally manufactured component to additive. The sustainability team at the NCC in Bristol is carrying out a 12-month life-cycle assessment covering manufacture, service and end of life. Printing closer to the finished shape should use less feedstock and leave less metal to machine away than starting with billet. The study will compare the two manufacturing routes alongside any benefit the redesigned component delivers in service.
The intended outcome in Newbury is something a purchasing department could use. As 3T-AM connects its factory and enterprise systems, it is developing digital product passports to document the carbon associated with making an individual component. By the end of 2028, Andrews wants that information to come with every part at no extra charge. For a customer compiling a supply-chain emissions report, it would become one more thing they could expect from a routine order.
