The HandySCAN 3D MAX Series is positioned for aerospace teams that need to measure large, complex components, bringing portable, metrology-grade 3D scanning into product development and quality workflows. The line comprises the next-generation HandySCAN MAX EVO and HandySCAN MAX EVO Elite, which carry the EVO platform's operating experience into large-part measurement. The stated fields of use are quality control, quality assurance, maintenance, repair and overhaul (MRO), and non-destructive testing (NDT).
Two accuracy tiers
The two models are separated mainly by volumetric accuracy:
- HandySCAN MAX EVO: 0.150 mm + 0.020 mm/m, aimed at product development teams measuring large, complex parts.
- HandySCAN MAX EVO Elite: 0.075 mm + 0.010 mm/m, for inspection and NDT work requiring higher precision.
The MAX Series is described as maintaining measurement reliability and accredited accuracy in accordance with ISO 17025 and VDI/VDE 2634.
Scanning without surface preparation
Both units are designed to handle a broad range of part sizes, complex geometries and difficult surface conditions, including highly reflective materials, without surface preparation. According to the product information, this can make measurement of fuselage sections, wings and structural assemblies more efficient by reducing the setup and disassembly steps that typically slow aerospace inspection.
Inspection away from the metrology room
Integrated photogrammetry is intended to support accurate measurement of large, complex parts outside controlled environments. That matters for maintenance operations, where inspections often have to happen on the hangar floor and aircraft downtime must be kept short. The stated advantage is that usable 3D data can be captured without extensive setup or transporting parts to a dedicated inspection area.
Mobility Kit and on-device feedback
Paired with the Mobility Kit, the MAX Series enables wireless, cable-free inspection for routine quality control. The practical claim is that inspection moves to the point of work, cutting dependence on fixed workstations, carts and cumbersome cable runs. The EVO platform also carries an embedded screen that puts scanner control and real-time data visualisation on the device itself, keeping scan data and the physical part within the operator's line of sight; the company cites this as helpful for complex, elevated and overhead scanning tasks. Real-time mesh visualisation lets operators check data coverage as they scan and find missed areas before leaving the part.
Taken together, the described combination of mobility, continuous feedback and fast data acquisition is meant to support a shorter scan-to-report cycle, with technicians moving freely around large aircraft structures and hard-to-reach areas, capturing data at the asset and completing inspections with less interruption to maintenance and quality work. These are stated capabilities; the product information does not include independent verification under specific hangar conditions.