KraussMaffei Extrusion has developed a single-stage extrusion process for PVC roofing membranes that replaces the conventional two-stage dry-blend route with continuous inline compounding. The new process, called PVC InlineMixing, feeds all solid and liquid components directly into a twin-screw extruder through gravimetric dosing systems, eliminating the separate heating-cooling-mixing combination used to prepare dryblend batches.
In the traditional route, PVC powder, plasticizers, additives and fillers are mixed batchwise in a hot-cold mixer to form a dryblend. The material is then cooled, stored and later plasticized in a twin-screw extruder before being processed into membrane. KraussMaffei says the inline approach removes those intermediate steps and heats the material only once.
Cost and energy claims
According to the company, energy consumption and energy costs can fall by up to 75 percent, depending on the formulation, system parameters and site. KraussMaffei says eliminating the separate mixing unit also reduces the footprint of the overall system and lowers labor requirements compared with a dry-blend premixing line. Maintenance costs are lower as well, the company says, because wear parts for the heating-cooling mixer are no longer required.
KraussMaffei frames the combined effect as lower capital expenditure and lower operating costs. Those savings, it says, create the conditions for a faster return on investment. The company also cites shorter production time as a benefit of the continuous sequence.
Formulation changes during operation
The process is designed to allow formula adjustments and color changes directly during operation through the integrated control system. That eliminates the need to prepare and store separate dryblend batches before a changeover. KraussMaffei says the result is greater flexibility for manufacturers that need to respond to new requirements or adjust formulations during production.
“For manufacturers of PVC roofing membranes, this represents a clear competitive advantage: lower production costs, greater flexibility and more efficient manufacturing,” said Christopher Bartel, head of sales for flat and foam at KraussMaffei Extrusion. He added that producers can respond more quickly to new requirements, adjust formulations during the production process and reduce energy and capital expenditure.
Validation and reference line
The process was developed at the KraussMaffei Extrusion Technology Center in Laatzen and validated with industrial roofing membrane formulations. The trials used a co-rotating twin-screw extruder from the ZE 65 BluePower series, equipped with loss-in-weight feeders for all solid components and multiple liquid feeders for free-flowing formulation components. The ZE BluePower series has a Da/Di ratio of 1.65; KraussMaffei says the combination of high torque and large free volume provides a wide process window for different formulations.
Tests confirmed what the company describes as excellent gelation levels of the PVC and high product quality. Mechanical properties and weldability of the membranes met industrial requirements across several formulations. Bartel said the results demonstrate the potential of PVC InlineMixing for industrial roofing membrane production, and that the Technology Center works with customers to test specific formulations under production-relevant conditions and prepare for industrial implementation.
PVC InlineMixing is already in use in an industrial production line for PVC roofing membranes. The reference plant achieves a total throughput of 1,800 kg/h with two extruders and two calenders. In that line, PVC, additives and fillers, as well as edge trimmings from the process, are continuously processed directly into finished membranes.
