SinceVision has introduced the SGI-N030W, a wide-spot laser displacement sensor intended for high-speed, non-contact dimensional measurement on rough, textured and irregular surfaces. The sensor extends the company's SGI Series and is aimed at lithium-ion battery production, semiconductor processing and precision mechanical engineering, where micrometre-level measurement must stay reliable across materials with differing surface finishes.
Wide spot versus point spot
Conventional point-spot laser displacement sensors concentrate reflected laser energy on a very small area. Microscopic features, including scratches, grain boundaries, brushed textures and matte finishes, can then produce signal variations that the system reads as dimensional change, which may generate false defect warnings and require additional inspection.
The SGI-N030W instead collects reflected light over a broader surface area, using an expanded laser spot together with optical triangulation. According to SinceVision, this averages localised microscopic peaks and valleys before signal conversion, reducing the influence of surface roughness and optical scattering. The company cites drawn metals, sandblasted surfaces and coated battery foils as examples of materials that stand to benefit.
Specified performance
The sensor has a reference distance of 30 mm and a measurement range of ±5 mm. SinceVision specifies repeatability of 0.05 µm on a diffuse white target under static conditions, with linearity of ±0.02% of full scale across the range. Sampling runs at 50 kHz, equivalent to a 20 µs update interval, which the company links to high-speed measurement and monitoring of dynamic processes.
Interfaces include RS485, 100Base-TX Ethernet and a switchable analogue output in either 4–20 mA current or 0–10 V voltage form. Master-slave synchronisation lets two sensor heads operate in opposition, measuring from either side of a component or moving material simultaneously.
Battery electrode thickness
In-line thickness measurement of lithium-ion battery electrodes is one of the principal applications SinceVision identifies. Coating thickness and uniformity influence energy density, internal resistance and long-term cell stability. Conventional offline inspection with contact micrometers or drop indicators depends on operator technique and can deform wet or uncured electrode material, while periodic spot checks cannot give continuous coverage across an entire production reel.
The proposed arrangement positions two synchronised sensors above and below the moving electrode web, mounted on a calibrated, low-thermal-expansion marble gantry. Each head measures its clearance to the material, and a system controller combines those readings with the fixed mounting datum to calculate the electrode's absolute thickness in real time. SinceVision reports production trials holding thickness measurement within ±0.3 µm at a web speed of 300 mm/s. The 50 kHz sampling rate is intended to provide enough longitudinal resolution to detect localised coating agglomerations, edge thinning and exposed substrate areas before the electrode proceeds to cell winding.
Semiconductor and assembly uses
The sensor is also intended for semiconductor manufacturing, where non-contact operation matters on sensitive wafer surfaces. Suggested tasks include wafer position verification, edge detection, height measurement, and checking wafer seating and chuck alignment in atmospheric transfer modules and vacuum load-lock systems. In precision assembly, SinceVision points to monitoring the movement of voice coil motors, linear actuators and micro-steppers, where the 50 kHz sampling rate can capture transient displacement, mechanical oscillation, settling behaviour and end-stop overshoot across the full measurement range. Position data can be sent to machine control systems over Ethernet for real-time process control.
Surface-related errors in the field
Jack Li, Global Sales and Marketing Director at SinceVision, says false defect warnings caused by surface texture remain a recurring challenge in battery manufacturing and precision assembly. He explains that conventional point-beam laser sensors can interpret microscopic scratches and rough coatings as actual thickness variation, slowing production lines and creating a need for extra manual inspection. The wider optical spot is designed to average out those surface-related variations, while synchronisation between opposing sensor heads supports high-speed thickness verification.
